The daisy chain topology is a networking technology in which two devices are interconnected in a sequence. The daisy chain can be linear or in the form of a ring that determines the flow of data. The major benefit offered by the daisy chain topology is the ease of connecting networking devices. It is adopted by various system administrators for adding a new device to the network. By enabling daisy chain topology on your Orbi WiFi system, your satellites will be able to communicate with the router by means of other satellites present in the home network.
It means one you enable the daisy chain topology on the Orbi system, you need not connect your satellites individually to the router. You can connect the first satellite to the host router and the second satellite to the first one. Wondering how to enable daisy chain topology on the Orbi system? Wonder no more. Because we have prepared a step-by-step guide for you to enable this feature on the Orbi router. So, stick to the reading.
Steps to Enable Daisy Chain Topology on Orbi System
-
Turn On Your Orbi Device
First of all, find a non-damaged wall socket in your house and plug your Orbi WiFi router into it. Once done, set the Power button on your Orbi router to the ON position.
Wait for the power LED on the Orbi device to turn solid green. On the off chance, the LED light is glowing any other color than green, reboot your Orbi router.
-
Connect Orbi Router to Internet Source
The next step in line is to gain internet access. Thus, grab a network cable and connect it to the Ethernet ports of your Netgear Orbi router as well as the existing internet source. However, you need to ensure that the network cable is damage-free and properly connected to the Ethernet ports of your WiFi devices.
Just in case you don’t like using wires, you can also use a wireless source to connect the router to the internet source. All you need to do is keep both WiFi devices at a safe distance.
-
Access the Orbi Login Page
After connecting your WiFi devices, turn on your computer. Make sure that it is having access to flawless electricity. Now, open a web browser like Opera, Chrome, Firefox, Internet Explorer, Safari, etc. Move to the address bar and type orbilogin.com.
Be careful while typing the default web address of the Orbi router. Else, not to sound negative but you won’t be able to enable the daisy chain topology on your Netgear Orbi WiFi system. Once you are done typing the web address in the address bar, press the Enter key. Then, you will get redirected to the login page of the Orbi WiFi router.
-
Log in to Your Orbi Device
On the official login page, you are required to enter the default username as well as the password of your Orbi device. Thus, take the help of the user manual and type the default login credentials of your Orbi router into their respective fields. Click the Log In button.
Note: If you have ever made changes to the login credentials of your Netgear Orbi device, then it is advised to use new details.
-
Look for Wireless Settings
Once you click the Log In button, the Netgear Genie dashboard containing several tabs will welcome you. Now, select the Advanced tab and click the Advanced Setup menu. Thereafter, select the Wireless Settings section.
The Advanced Wireless Settings page will appear before your eyes. Now, select the Enable Daisy-Chain Topology check box and click the Apply button. The changes you have made to your device will become effective in a minute or two.
In this way, you can enable the daisy chain topology on your Netgear WiFi system. On the off chance, you fail to attain success with the process, consider updating the firmware of your Orbi router as well as the satellite by accessing the orbilogin page.
To Conclude
Here, we wrap up our guide to enable the daisy chain topology on an Orbi network system. Anticipating that the guidelines discussed above will help you do that in a hassle-free manner and you will be able to connect your Orbi satellites with each other.